Paver Installation in Biltmore Shores, NY

Waterfront Pavers Built to Last

Professional paver installation designed for coastal living—no cracking, proper drainage, beautiful results that boost your property value.

A masonry contractor Nassau County uses yellow gloves and a rubber mallet to lay gray paving stones on sand, creating a patio or walkway. Nearby, a tape measure and extra pavers are ready for use.

Hear from Our Customers

A worker wearing gloves and yellow work pants uses a rubber mallet to install concrete paving slabs, with various tools like a level, tape measure, and broom nearby—typical of a skilled masonry contractor Nassau County, NY.

Paver Patio Installation Biltmore Shores

Your Outdoor Space, Finally Done Right

You know what it’s like living near the water. The salt air, the shifting ground, the way concrete cracks after just a few seasons. You’ve probably seen it happen to your neighbors—beautiful patios that turn into expensive headaches.

Pavers are different. They flex with the ground instead of fighting it. They handle the coastal weather that destroys concrete. And when you do need a repair, you replace individual stones instead of tearing up the whole surface.

The result? An outdoor space that looks better year after year, not worse. A patio where you can actually entertain without worrying about trip hazards or unsightly cracks. An investment that adds real value to your Biltmore Shores home.

Masonry Contractors Biltmore Shores NY

25 Years of Coastal Masonry Experience

We’ve been serving Long Island’s waterfront communities for over 25 years. We understand what works in coastal environments and what doesn’t.

We’ve installed pavers in Biltmore Shores long enough to know the soil conditions, drainage challenges, and weather patterns that affect your outdoor spaces. Our team knows how to build proper bases that won’t shift, create drainage systems that actually work, and select materials that stand up to salt air and freeze-thaw cycles.

This isn’t just about laying stones. It’s about creating outdoor spaces that enhance your waterfront lifestyle and protect your investment for decades to come.

Gray paving stones being laid in a backyard by a masonry contractor Nassau County, NY, with some stacked in piles on the partly finished surface. A section of green lawn and a wooden fence are in the background. Sand and tools are visible on the side.

Paver Installation Process Biltmore Shores

The Right Way, From Base to Finish

Every successful paver installation starts below ground. We excavate to the proper depth, then install a 4-inch compacted stone aggregate base designed for coastal conditions. This isn’t optional—it’s what prevents your pavers from shifting or settling over time.

Next comes the 1-inch sand bedding layer, perfectly leveled and sloped for drainage. This is where experience matters. Too much slope and you get water runoff issues. Too little and you get pooling problems.

We set each paver by hand, checking alignment and spacing as we go. Edge restraints keep everything locked in place. Joint sand fills the gaps and gets compacted to create a solid, unified surface. The final step is a thorough cleanup and walkthrough to ensure everything meets our standards.

A person in red gloves and black work boots, likely a masonry contractor Nassau County, is laying gray pavers on sand with a rubber mallet and tape measure, working diligently on constructing a paved walkway or patio.

Ready to get started?

Explore More Services

About Raffaele Outdoor Concepts

Get a Free Consultation

Paver Services Biltmore Shores NY

Complete Paver Solutions for Waterfront Living

Our paver installation service includes everything you need for a professional result. We handle excavation, base preparation, drainage solutions, material delivery, and complete installation. You get Cambridge pavers or other premium materials, proper edge restraints, and joint sand application.

For Biltmore Shores properties, we pay special attention to drainage—a critical factor in this coastal area. We create proper slopes, install drainage systems where needed, and ensure water flows away from your home and foundation. This prevents the pooling issues that plague many waterfront properties.

We also include a thorough site cleanup and a detailed walkthrough of your new installation. You’ll understand how to maintain your pavers and what to expect in terms of settling and long-term performance.

A masonry contractor Nassau County, NY kneels on the ground, wearing gloves and a cap, carefully placing brick pavers for a patio. Nearby, a wheelbarrow, shovel, and spirit level rest on the unfinished surface.

How long do pavers last in coastal areas like Biltmore Shores?

Properly installed pavers can last 15-50 years in coastal environments, significantly longer than concrete. The key is professional installation with the right base materials and drainage systems. Unlike concrete, pavers flex with ground movement instead of cracking. They’re also more resistant to salt air and freeze-thaw cycles. When individual pavers do need replacement due to staining or damage, you can replace just those stones without affecting the rest of your surface. The longevity depends on proper base preparation, quality materials, and appropriate drainage for your specific site conditions. That’s why we focus so heavily on the foundation work that most homeowners never see.
Pavers offer several advantages over concrete, especially in waterfront areas. They don’t crack like concrete slabs, they provide better drainage, and they’re easier to repair when needed. Concrete patios typically crack within a few years due to ground movement and freeze-thaw cycles. Once cracked, the entire slab often needs replacement. Pavers, on the other hand, move slightly with the ground and can be individually replaced if damaged. Pavers also allow water to drain through the joints, reducing pooling and runoff issues. This is particularly important in Biltmore Shores where proper drainage is essential for preventing foundation problems and managing stormwater.
Paver installation in the Long Island area typically ranges from $16-30 per square foot, depending on materials, design complexity, and site conditions. A standard 16×18 foot patio usually costs between $4,600-$8,000 for professional installation. The investment includes excavation, proper base preparation, premium materials, professional installation, and cleanup. While the upfront cost is higher than concrete, pavers provide better long-term value due to their durability and easier maintenance. Waterfront properties often require additional drainage work, which can affect pricing. We provide detailed estimates that break down all costs so you understand exactly what you’re getting for your investment.
Pavers require minimal maintenance, but coastal properties do benefit from occasional cleaning and re-sanding. The salt air can cause some surface buildup, and joint sand may need refreshing every few years. We recommend pressure washing annually to remove salt buildup and organic matter. Joint sand should be checked and topped off as needed—usually every 2-3 years depending on weather exposure. Some homeowners choose to seal their pavers for additional protection, though this isn’t always necessary. The key is addressing small maintenance items before they become bigger problems. Regular cleaning and joint sand maintenance will keep your pavers looking great and functioning properly for decades.
Yes, properly installed pavers are designed to handle Long Island’s freeze-thaw cycles better than concrete. The flexible joints between pavers allow for expansion and contraction without cracking. The secret is in the base preparation. We use a 4-inch compacted aggregate base that drains well and won’t shift with frost. The sand bedding layer provides additional flexibility while maintaining a stable surface. Concrete, by contrast, is rigid and prone to cracking when water freezes in small cracks and expands. Once concrete cracks, water infiltration accelerates the damage. Pavers avoid this problem entirely through their flexible design.
For Biltmore Shores’ coastal environment, we typically recommend concrete pavers or natural stone options that resist salt air and provide good drainage. Cambridge pavers are a popular choice due to their durability and variety of styles. The specific choice depends on your aesthetic preferences, budget, and intended use. Concrete pavers offer the most design flexibility and are cost-effective. Natural stone provides a premium look but requires a higher investment. We help you select materials that complement your home’s architecture and handle the specific challenges of waterfront living. Factors like slip resistance, color retention, and maintenance requirements all play into the decision.