Paver Installation in Elmont, NY

Pavers Built to Last Decades

Transform your outdoor space with professional paver installation that withstands Long Island’s changing seasons and daily use.

A masonry contractor Nassau County uses yellow gloves and a rubber mallet to lay gray paving stones on sand, creating a patio or walkway. Nearby, a tape measure and extra pavers are ready for use.

Hear from Our Customers

A worker wearing gloves and yellow work pants uses a rubber mallet to install concrete paving slabs, with various tools like a level, tape measure, and broom nearby—typical of a skilled masonry contractor Nassau County, NY.

Professional Paver Services Elmont

Your Outdoor Space, Actually Usable

You’re tired of looking at that cracked concrete or muddy patch where you should be relaxing. Professional paver installation changes everything.

Picture stepping onto a level, beautiful patio that drains properly after Nassau County’s heavy rains. No more avoiding your backyard because it’s unusable half the year. No more explaining to guests why they can’t use the outdoor space you’ve been meaning to fix.

With proper paver installation, you get an outdoor area that works in every season. One that adds real value to your home and actually gets used by your family.

Masonry Paver Contractors Elmont

25 Years of Getting It Right

We’ve been installing pavers throughout Nassau County since before paver installation became the neighborhood standard. We’ve seen what works and what fails after Long Island’s freeze-thaw cycles.

We’re fully licensed and insured in Nassau County, which means you’re protected and we’re accountable. Our work meets ICPI industry standards because we know shortcuts cost you money later.

Most Elmont homeowners choose us because we show up when we say we will, finish on schedule, and our installations look exactly like what we discussed. No surprises, no excuses.

Gray paving stones being laid in a backyard by a masonry contractor Nassau County, NY, with some stacked in piles on the partly finished surface. A section of green lawn and a wooden fence are in the background. Sand and tools are visible on the side.

Paver Patio Installation Process

How We Install Pavers Right

First, we excavate to the proper depth and grade for drainage. This matters more in Elmont than most places because of our clay soil and seasonal water issues.

Next, we install the base layer using Class II road base, properly compacted. This is where most contractors cut corners, but it’s what determines whether your pavers stay level or sink and shift over time.

Then we lay your pavers with precise spacing and alignment, followed by joint sand and sealing if requested. The whole process typically takes 3-5 days depending on size, and we clean up completely each day.

A person in red gloves and black work boots, likely a masonry contractor Nassau County, is laying gray pavers on sand with a rubber mallet and tape measure, working diligently on constructing a paved walkway or patio.

Ready to get started?

Explore More Services

About Raffaele Outdoor Concepts

Get a Free Consultation

Paver Patios Nassau County

What Your Installation Includes

Every paver installation includes proper excavation, base preparation, and precise installation of your chosen pavers. We use Cambridge pavers and other premium materials that handle Nassau County’s weather extremes.

You’ll get pavers that drain properly – crucial for Elmont’s clay soil conditions. We ensure proper slope and base preparation so water moves away from your home and doesn’t pool on your new patio.

Most installations include basic edging and joint sand. Sealing is available as an add-on service that protects against stains and enhances color, though it’s not required for structural integrity.

A masonry contractor Nassau County, NY kneels on the ground, wearing gloves and a cap, carefully placing brick pavers for a patio. Nearby, a wheelbarrow, shovel, and spirit level rest on the unfinished surface.

How much does paver installation cost in Elmont, NY?

Paver installation in Nassau County typically runs $12-30 per square foot, depending on the paver type and site conditions. A standard 12×12 patio usually costs $1,400-$2,500 installed. The price depends on excavation needs, base requirements, and paver selection. Elmont’s clay soil sometimes requires extra base work, which affects cost. We provide detailed estimates that break down material and labor costs so you know exactly what you’re paying for. Complex patterns or premium materials like natural stone increase costs, while basic concrete pavers keep prices more affordable.
Cambridge pavers perform exceptionally well in Nassau County’s freeze-thaw cycles. They’re manufactured to withstand temperature changes without cracking or shifting. Concrete pavers offer the best balance of durability and cost for most homeowners. They handle our winters better than natural stone and cost less to replace if individual pavers get damaged. Brick pavers work well too, though they’re more expensive and offer fewer color options. Natural stone looks beautiful but requires more maintenance and costs significantly more upfront.
Properly installed paver patios last 25-50 years in our climate. The key is proper base preparation and drainage, which prevent settling and frost heave. Most paver failures happen because of poor base work, not the pavers themselves. When we excavate to proper depth and use correct base materials, your installation stays level and stable through decades of Long Island weather. Individual pavers can be replaced if damaged, which is impossible with concrete slabs. This means your patio can essentially last indefinitely with minimal maintenance.
Sealing isn’t required for structural integrity, but it protects against stains and enhances color. Most Elmont homeowners choose sealing because it makes maintenance easier. Sealed pavers resist oil stains from grills and cars, and they’re easier to clean. The sealer also prevents weeds from growing in joints and reduces fading from UV exposure. We recommend sealing every 2-3 years for best results. It’s an optional service that adds cost but saves time on maintenance and keeps your investment looking new longer.
We can install pavers over existing concrete if it’s level, stable, and properly draining. However, this approach has limitations and isn’t always the best solution. The existing concrete must be in good condition without major cracks or settling. We also need to ensure proper drainage, which can be challenging when building on top of existing surfaces. Most of the time, removing old concrete and starting fresh gives better long-term results. It allows proper base preparation and ensures your new pavers will last decades rather than failing prematurely.
Paver maintenance is minimal compared to other outdoor surfaces. Regular sweeping and occasional power washing keep them looking good. Weeds between pavers can be controlled with polymeric sand or periodic weed killer application. If individual pavers get stained, they can be cleaned with appropriate cleaners or replaced entirely. Resealing every 2-3 years maintains stain resistance and color. Overall, pavers require less maintenance than wood decks or concrete patios while lasting much longer.